Introducing 3D Printers from BCN3D

The Epsilon W50 and W27, and Sigma D25 are dual extrusion 3D printers that are great for industrial and workshop applications … Read More

Solutions to Common Printing Problems

If you are new to 3D printing, this blog offers the most common 3D printing problems, their cause, and on how you can avoid them. … Read More

Mechatronics In Large Format 3D Printing

One of the great things about being in research and development is reaching a goal only to see another goal post in the distance. This… Read More

The Next Dynamic Demo On The 3DP Roadshow

There has been a lot of media buzz since the introduction of 3D printers. As demand has increased, so has the competition to bring top… Read More

The WorkCell 3D Printer

The WorkCell 3D printer is a large format 3D printer that combines a build area of more than 1 cubic meter with a fully enclosed, heated… Read More

The WorkCenter 500

Extra Large Format 3D Printer for Additive Manufacturing, designed to provide a build volume of 1.4 m x 2.8 m x 700 mm, without sacriﬁcing… Read More

3D Printing Tech Tips: Single Walled Objects

The following are some common issues faced while 3D Printing Single Walled Objects and one or more possible solutions for each problem… Read More

3D Printed Christmas Tree

In this video 3D Platform demonstrates how to 3D print a six section Christmas tree sized at 36″ x 55.5″ (915mm x 1410mm). This top… Read More

3D Printing Tech Tips: Soluble Support Structures

Support structures printed with soluble materials like PVA, HIPS, BVOH, etc. are considered to be an effective replacement for breakaway supports… Read More

Building Blocks of Success: Metal Inserts

In this video we demonstrate how to set your print for metal inserts. We show you how to place an object in or through any 3D print… Read More

Building Blocks of Success: Dual Extruder Prints

In this video we demonstrate how you set and align the extruders on a large format 3D printer for dual color prints. Go beyond big… Read More

3D Printing the Colorado State Building

3DP prints the Colorado State Capital Building. Utilizing the HFA extruder and HFE 300, we saw a savings of 15 hours and a 6 lb of filament… Read More

Building Blocks of Success: Top Layer Test

Use this Top Layer Test tutorial video and learn how 3D Platform can help you to create a successful top layer for your large 3D print and… Read More

Building Blocks of Success: Single-Color Infill

Use this single-color infill box tutorial video to help learn which infill pattern to choose and how to properly create infill to create larger prints… Read More

Building Blocks of Success: Thin Wall Box

Successfully set your extruder flow rate. Use this thin wall box tutorial video to help quickly determine if the flow rate is set properly on… Read More

Building Blocks of Success: Test Chip

Use this test chip tutorial video to help quickly determine if the flow rate is set properly on your large format 3D printer. It is important that… Read More